|
Sifters
& Purifiers
Satake's
Sifters are capable of separating powdered and granular materials by size
differential. The SPSB Plansifter can make up to 7 separations per
section.
The Minisifter and N-Sifter are particularly suited to smaller applications
where a sized product is required i.e. oversize, good product and undersize.
Their multi-sieve decks create a much larger overall sieving area when compared
to vibratory or centrifugal machines of the same 'footprint' size.
Most
of Satake's sifters use a planetary motion which avoids much of the product degradation
associated with centrifugal and vibratory machines. It also prevents 'upending'
of elongated products.
Typical
Applications include:
Wheat,
rice and maize products production
Carbon black processing
Herb & spice manufacture
Cocoa production
Nuts, Plastics and many other granular and powdered products
Many of our sieving machines
now benefit from the use of Satake's
Patented INTERLOCK sieving system, using hygienic plastic instead of the traditional
wood/melamine and felt construction.
 |
SPSB Plansifter
The Satake Plansifter
SPSB is engineered to give a
wide range of capacities to meet all anticipated sifting requirements in the milling
industry. The SPSB is produced in a modular range of four, six and eight section machines
embracing two different stack heights of nominally 24 and 30 sieves. Three sieve sizes are
available.
More |
 |
 |
RMSA Minisifter The RMSA is a high capacity yet compact, free-standing unit used
for separating particulate material in the food, chemical, pharmaceutical, plastics and
similar process industries. The machine is capable of making up to 4 size separations per
machine with a variety of internal flow schemes.
The Minisifter is ideal for sieving large quantities
of materials through fine apertures, particularly as a flour redresser in the flour
milling industry.
More |
|
|
STSA
Duosifter
The Duosifter
STSA is a compact high capacity sifter which is ideal for many applications in cereal
milling and food industries for sieving a wide range of granular and floury stocks.
The STSA is
particularly suitable for flour redressing (rebolt), maize (corn) milling and starch
sieving. It can also be used for wheat grading and cleaning duties.The Duosifter STSA has
two stack sections and is available in a stack height of fourteen sieves. Each section can
make up to seven separations.
The STSA is of a unique design that combines simplicity of
construction and maintenance while providing ease of access, compact dimensions with clean
and hygienic operation.
More |
|
 |
N Sifter The N Sifter is an
exceptionally versatile, compact machine of high capacity which can used for either
general purpose sifting or flour redressing.
The sifter
consists of two independent nests of square sieves, capable of simultaneously handling two
separate stocks. More |
|
 |
SVSB Vibrosifter The Satake Vibrosifter SVSB is especially designed
for efficient sifting of difficult stocks encountered in cereal milling processes. For
example, filter flours, bran finisher throughs and maize (corn) flours which are fine,
sticky and can have high oil or moisture content.
More |
|
 |
PLSB
Series 2000 Laboratory Sifter
The
Satake Laboratory Sifter PLSB provides a rapid method of carrying out particle size
determinations. It is designed to use either a stack of up to four 255mm wooden sieves
with lid and receiver or four 200mm diameter Endecott brass sieves.
The
sifter oscillates the table and nest of sieves attached to it in a planetary motion
similar to that of sifters commonly used in the Flour Milling and other industries.
More
|
|
 |
SPU Purifier
The
Satake Purifier SPU is a high capacity, triple deck machine providing the highest level of
operating efficiency.
The Purifier has a fabricated chassis with box
section strengthening supports. Maintenance-free rubber springs are located on the box
section supports and carry the sieve assembly.
More |
|
|
